Sorry I don't have the answer for your foundation, but very cool model! I would dig the hole and pour a footer in the bottom at least 12" thick with rebar and then stack blocks from there. A house is very heavy and you don't want settling problems, you need to make sure you spread the weight enough.
Dean
LHBA Class of Feb. 2006
Best investment of my life.
http://s522.photobucket.com/albums/w343/deanbrossman/
Tips on pier and beam please.
Comments
04/01/2009 - 10:53
Cool Model
04/01/2009 - 14:51
block foundation
As I recall cinder block foundation comes up in class and is not recommended based on the weight of a log home.
Mr E might have said something about pouring concrete into them as a possibility but if I'm not mistaken they still dont recommend this technique.
Perhaps someone else remembers...
06/12/2009 - 19:06
Tips on pier and beam
In Colorado, you are required to have a test of the soil base you intend on building. Then, and engineer makes a design based on the soil and geologic qualities. It varies from state to state and county to county. Here, the engineer makes the call and you cannot build without his 'wet-stamped' foundation drawings.
I could make suggestions on your foundation (I was a Civil Engineer in a former life) but your building code requirements depend on your county and would still require a Civil Engineer's blessing, probably.
Hope this helps.
Jeff
I am planning to build our log home on pier and beam/cinder block. I am not sure on the footings and how deep to dig. I am not in danger of freeze here in texas. I am planning to pour the blocks solid with cement anr rebar all the way to the bottom, and stacking them in two's making the piers 16" square. Should I just dig a hole and pour in cement for a pad or build with just the soild blocks above ground to set my beams on ? Pine 8x10 beams. I built a model of the home. 30x50 with 6 support beams 10 ft. apart.
